Qolsys IQ Panel - Programming An Ecolink Keyfob

Make sure your system is disarmed during this process. Start by selecting “Settings”

1.png

Enter your Installer Code

2.png

Select “Installation"

3.png

Select “Security Sensors”

4.png

Select “Auto Learn Sensor”

5.png

At this point, you’ll need to enroll the keyfob. To do this, take your keyfob and hold down the “Lock” and“Unlock” buttons at the same time.

6.jpg Graphic_1.png

Once this is done, the IQ Panel will beep and ask if you want to add the device to your sensor list. Select“OK”

7.png

Here you will need to program the proper information for this device.

  • Sensor DL ID: 
  • Sensor Type: Select “Keyfob”
  • Sensor Name: Select "Keyfob" or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device when it’s used.
  • Sensor Group: This is used to change the behavior of the device. For this device, leave the Sensor Group alone.
  • Voice Prompts: This allows you turn on or off the vocal chime. 

Sensor_Tripped_-_Add_Sensor.jpg

When ready, select “Add New”

8.png

You’re done! 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.