Qolsys IQ Panel - Programming A Carbon Monoxide Detector

1. Press SETTINGS then enter the Installer Code 1111 or 2222

Settings_IQ_Panel.jpg Installer_Code_IQ_Panel.jpg

2. Press INSTALLATION then SECURITY SENSORS

Installation_IQ_Panel.jpg Security_Sensors_IQ_Panel.jpg

3. Press AUTO LEARN SENSOR

Auto_Learn_Sensor_IQ_Panel.jpg 6.jpg

 4. Learn sensor by removing Carbon Monoxide sensor from be back plate by twisting counter-clockwise

 gra_1.png

5. The IQ Panel beeps and ask to add the device to your sensor list, press OK

Ok_Button_IQ_Panel.jpg

6.  Program sensor settings then press ADD to save then press the HOME button to exit

Add_Sensor_IQ_Panel.jpg Add_New_Sensor_IQ_Panel.jpg

  • Sensor DL ID:  Leave this section alone
  • Sensor Type: Select “Carbon Monoxide”
  • Sensor Name: Select an appropriate name for the sensor or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device when it’s used.
  • Sensor Group: This Set this to 34 CO Carbon Monoxide Detector
  • Voice Prompts: This allows you turn on or off the vocal chime. 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.