Qolsys IQ Panel - Programming A Temperature Sensor

 

Make sure your system is disarmed during this process. Start by selecting “Settings”

1.png

Enter your “Installer Code”, in this case I’m going to use the default which is “1111”

2.png

Select “Installation"

3.png

Select “Security Sensors”

4.png

Select “Auto Learn Sensor”

5.png

For the IQ Temp, there are 2 sensors built into the device, a freeze sensor and a heat sensor. We will need to enroll each sensor separately into the panel. Start by opening the casing of the device by pushing-in the tab with a flat blade screwdriver.

6.jpg gra_11.png

Once this is done, the IQ Panel will beep and ask if you want to add the device to your sensor list. Select“OK”

7.png

Here you will need to program the proper information for this device.

  • Sensor DL ID: 
  • Sensor Type: Select “Freeze”
  • Sensor Name: Select "Freeze" or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device when it’s used.
  • Sensor Group: This is used to change the behavior of the device. For this device, leave the Sensor Group alone.
  • Voice Prompts: This allows you turn on or off the vocal chime. 

When ready, select “Add New”

8.png

Next, you'll need to enroll the Heat sensor. With the casing removed, push the batteries out from the metal contacts. Press down on the tamper switch while re-inserting the batteries. 

6.jpg gra_22.png

Once this is done, the IQ Panel will beep and ask if you want to add the device to your sensor list. Select“OK”

7.png

Here you will need to program the proper information for this device.

  • Sensor DL ID: 
  • Sensor Type: Select “Heat”
  • Sensor Name: Select "Heat" or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device when it’s used.
  • Sensor Group: This is used to change the behavior of the device. For this device, leave the Sensor Group alone.
  • Voice Prompts: This allows you turn on or off the vocal chime. 

When ready, select “Add New”

8.png

 You're done!

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.