IQ Panel - Program WiFi

1. Press SETTINGS then enter MASTER CODE

Enter_Programming_01.png Enter_Programming_02.png

2. Press SYSTEM SETTINGS then WIRELESS SETTINGS

WiFi_Enable_01.jpg WiFi_Enable_02.jpg

3. Press Check Box by Wi-Fi to enable then press Wi-Fi SETTINGS

WiFi_Enable_03_Turn_On.jpg WiFi_Enable_04_Select_Network_1.jpg

4. Select WiFi network then press PASSWORD

WiFi_Enable_04_Select_Network_2.jpg WiFi_Enable_05_Encryption.jpg

5. Enter WiFi Encryption Password then press DONE then press CONNECT

WiFi_Enable_06_Enter_Encryption.jpg WiFi_Enable_07_Connect.jpg

6. Connected shows if successful, press BACK or HOME button to exit

WiFi_Enable_08_Exit.jpg Home_Button.jpg

Was this article helpful?
4 out of 6 found this helpful

Comments

0 comments

Article is closed for comments.