IQ Panel - Sensor Test

1. Press SETTINGS then enter Master Code

Enter_Programming_01.jpg Enter_Programming_02.jpg

2. Press SYSTEM TESTS then press SENSOR TEST

System_Tests__2_.jpg Sensor_Test__2_.jpg

3. Activate all sensors

5.png

  • Door/Window Sensor - Open and Close

            White_Open_Window.jpgOpen_Close_Door.jpg                 

  • Keyfob - Hold both LOCK and UNLOCK button for 2 to 3 seconds

  G.E._Keychain_Final.jpgEcoLink_Keychain_Final.jpg

  • Motion Detector - Press top button and remove front from back plate
    • Qolsys - Press top button then remove motion from back plate
    • Interlogix - Press bottom button then remove motion from back plate

                            Qolsys Motion                                              Interlogix Motion

Iq_Motion_collage__2_.jpg GE_Motion_Collage.jpg

4. Results should display as Excellent, Pass or Poor, press BACK or HOME button to exit

Sensor_Test_Exit.png

Was this article helpful?
0 out of 2 found this helpful

Comments

1 comment

Please sign in to leave a comment.