Qolsys IQ Panel 2 - Programming A Carbon Monoxide Detector

1. Swipe down from the clock display at the top of the screen then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Installation_Screen.png 6.png

4. Press SECURITY SENSORS then AUTO LEARN SENSORS

7.png 8.png

5. Twist the carbon monoxide detector from the back plate then press OK to confirm

 Auto_Learn_Confirm.png

Arrow_Down.jpg

6. Program sensor settings then press ADD NEW to save and exit

 Add_Sensors_02.jpg

  • Sensor Type: Select “Carbon Monoxide”
  • Sensor Name: Select an appropriate name for the sensor or create a "Custom Description"
  • Chime Type: This allows you to apply a specific sound to your device when it’s used.
  • Sensor Group: Press then from the dropdown box select 34 - CO Carbon Monoxide"
  • Voice Prompts: Leave at ON

7. Press HOME to exit programming

Auto_Learn_Sensor_12_Exit.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.