1. Help Center
  2. Panel Programming
  3. Qolsys IQ Panel 2

Qolsys IQ Panel 2 - Programming A Garage Door Sensor

Avatar
Follow

The IQ Tilt is designed to tell you whether an overhead garage door is open or closed

Sensor Installation

1. Remove the battery tabs then apply adhesive tape to the bottom of the sensor

            

2. Mount the sensor horizontally with the arrow facing down pointing to the door

IQ Panel 2 Programming

1. Swipe down from the clock display at the top of the screen then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Installation_Screen.png 6.png

4. Press SECURITY SENSORS then AUTO LEARN SENSORS

7.png 8.png

5. Open the glass break detector cover to learn then press OK to confirm

 Auto_Learn_Confirm.png

Graphic_1.png

6. Program sensor information then press ADD NEW to save then HOME to exit

11.png Auto_Learn_Sensor_12_Exit.jpg

  1. Sensor DL ID: Don't touch this option
  2. Sensor Type: Select “Door/Window”
  3. Sensor Name: Select an appropriate name or create a "Custom Description"
  4. Chime Type: This allows you to apply a specific sound to your device when it’s used
  5. Sensor Group: Enter “10” for an entry delay “13” if for no entry delay 
  6. Voice Prompts: This allows you turn on or off the vocal chime
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more