2GIG GC2 GoControl Panel Cover Tamper Alert

Please follow the steps below to address the 2GIG GC2 GoControl panel cover tamper alert: 

 

1. Remove top screw and pry open slots with a flat head screwdriver

2GIG_GC2_Screw_Top.JPG

 

2. Gently pull cover down, then close the cover again and tighten the screw

clearcovertampe2giggocontrol2.jpg

 

*If screw is lost, replace with a Phillips oval head 4-40 X 3/8" SS screw

Was this article helpful?
1 out of 2 found this helpful