GC2 GoControl - Clear Cover Tamper Trouble

Cover tamper triggers a trouble signal when the GoControl has been opened.

1. Remove top screw and pry open slots with a flat head screwdriver.

2GIG_GC2_Screw_Top.JPG

2. Gently pull cover down then close the cover again and tighten the screw

clearcovertampe2giggocontrol2.jpg

 (If screw is lost replace with Phillips oval head 4-40 X 3/8" SS)

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.