1. Press SYSTEM SETTINGS then enter the Master Code

GC3_User_Codes_01_Ready_To_Arm.png GC3_User_Codes_02_Enter_Code.png

2. Press USERS then press ADD USER

GC3_User_Codes_03_Main_Menu.png GC3_User_Codes_Add_00_List.png

3. Enter the new User Name then press NEXT then enter the new User Code and press NEXT

GC3_User_Codes_Add_01_Enter_Name.png GC3_User_Codes_Add_02_Enter_User_Code.png

4. Enter the new User Code again to confirm then press NEXT to finish, press backwards_triangle.JPGor the HOME button to exit

 GC3_User_Codes_Add_03_Confirm_User_Code.png GC3_User_Codes_Add_04_List_with_New_User.png GC3_Home_Button_2.jpg

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.