ADC-V722W Outdoor Camera WPS Wi-Fi Setup

WPS enrollment mode is a quick way to connect a camera to the Wi-Fi network router.

 

1. Hold the WPS button 5 seconds until the LED flashes blue

ADC-V722W_Outdoor_Bullet_Camera_Blue_LED.jpg

 

2. Press and release the WPS button on router, or enable WPS mode in router programming

Router_WPS_Button.jpg

 

3. The LED turns green if successfully connected and red if it was not

ADC-V722W_Outdoor_Bullet_Camera_Green_LED.jpg

Was this article helpful?
0 out of 2 found this helpful