
MODELS
ADC-V520, ADC-V520IR, ADC-V521IR, ADC-V620PT, ADC-V720,
ADC-V721W, ADC-V820, ADC-VS120, ADC-VS420
INSTALL TROUBLE CONDITIONS
LED Status |
Description |
All off |
Power off |
Solid Red |
Power on, system booting |
Green blink every second |
The camera is connected to the local router. If this state persists for over 2 minutes, the camera cannot connect to the internet. |
Solid Green |
Full internet connection with Alarm.com and the camera is ready to be installed |
Blue blink every 0.15 seconds |
WPS connecting in progress (this process will end in a few minutes) |
White blink every 0.15 seconds |
Wi-Fi Access Point Mode |
TROUBLE CONDITIONS
Solid Red + Green intermittent flashing |
Wireless network connection failed, the Wi-Fi password entered may be incorrect |
Solid Red |
No local or internet connection |
PRIVACY MODE
Solid Blue |
Privacy Mode enabled. Press and hold the WPS button for one full second to clear. |
MAINTENANCE
Red blink every 0.15 seconds |
Upgrading firmware do not unplug |
Red + Green blink every 0.15 seconds |
Restoring factory default settings |
NOTES
This LED is Orange on the ADC-V820 Indoor Dome Camera |
This LED is Green on the ADC-V720 Outdoor Camera |
Wireless Mode is not available on the ADC-V720, ADC-V820, ADC-VS120, and ADC-VS420 models |
Privacy Mode not available on the ADC-V720, ADC-V820, ADC-VS120, and ADC-VS420 models |
Wi-Fi Access Point Mode only available on the ADC-V521IR and ADC-V721W models |
Was this article helpful?
0 out of 0 found this helpful
Comments
Please sign in to leave a comment.