IQ Panel 2 - Bluetooth Disarm Setup

Allows disarming system when Bluetooth-enabled phone is near panel

IQ Panel 2 can pair up to 5 smartphones

1. Enable Bluetooth discovery in Android or IPhone Bluetooth settings

Bluetooth_Pairing_10_IOS_Settings.png Bluetooth_Pairing_10_Android_Settings.png 

2. Swipe down from clock display for drop-down then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

3. Press ADVANCED SETTINGS then enter Master Code

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

4. Press BLUETOOTH DEVICES then press SETTINGS

Bluetooth_Enable_01_Devices_Main.png Bluetooth_Enable_02_Bluetooth_Menu.png

5. Enable BLUETOOTH and BLUETOOTH DISARM then BACK ARROW then ADD PHONE

Bluetooth_Enable_03_Bluetooth_Settings_Menu.png Bluetooth_Pairing_01_Bluetooth_Main.png

6. Select smartphone from list then press PAIR

Bluetooth_Pairing_03_Select_Device.png Bluetooth_Pairing_04_Request_Sent.png

7. Pairing request should appear on phone, press OK to accept then on IQ Panel 2 press OK

Bluetooth_Pairing_05_Smartphone_Accept.png Bluetooth_Pairing_06_Pairing_Successful.png

8. Smartphone appears under Paired Devices, press BACK ARROW or HOME to exit

Bluetooth_Pairing_07_Pairing_Exit.png Bluetooth_Pairing_08_Bluetooth_Exit.png

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.