IQ Panel 2 - Bluetooth Pairing/Disarm Setup

The IQ Panel 2 can pair up to 5 smartphones and allow you to disarm your system when a Bluetooth-enabled phone is near the panel.

 

Bluetooth Pairing Video

 

Bluetooth Disarm Setup Instructions

1. Enable Bluetooth discovery in Android or iPhone Bluetooth settings

Bluetooth_Pairing_10_IOS_Settings.png Bluetooth_Pairing_10_Android_Settings.png 

 

2. Swipe down from clock display for drop-down, then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

 

3. Press ADVANCED SETTINGS, then enter Master Code

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

 

4. Press BLUETOOTH DEVICES, then press SETTINGS

Bluetooth_Enable_01_Devices_Main.png Bluetooth_Enable_02_Bluetooth_Menu.png

 

5. Enable BLUETOOTH and BLUETOOTH DISARM, press the BACK ARROW, then ADD PHONE

Bluetooth_Enable_03_Bluetooth_Settings_Menu.png Bluetooth_Pairing_01_Bluetooth_Main.png

 

6. Select smartphone from list, then press PAIR

Bluetooth_Pairing_03_Select_Device.png Bluetooth_Pairing_04_Request_Sent.png

 

7. Pairing request should appear on phone, press OK to accept, then on the IQ Panel 2 press OK

Bluetooth_Pairing_05_Smartphone_Accept.png Bluetooth_Pairing_06_Pairing_Successful.png

 

8. Smartphone appears under Paired Devices, press BACK ARROW or HOME to exit

Bluetooth_Pairing_07_Pairing_Exit.png Bluetooth_Pairing_08_Bluetooth_Exit.png

Was this article helpful?
1 out of 1 found this helpful