2GIG GC3 - Add Z-Wave Light Module

1. Press SYSTEM SETTINGS then enter the Installer Code 1561

GC3_System_Settings_01_Ready_To_Arm.png GC3_System_Settings_02_Enter_Code.png

2. Press SMART HOME SETTINGS then ADD DEVICES

GC3_System_Settings_03_Smarthome_Select.png GC3_System_Settings_04_Smarthome_Main.png

3. Press the Mate or Learn button on the device

GC3_System_Settings_05_Add_Devices.png Z-Wave_Mate_Button.jpg

4. Once the light module is added press OK

GC3_System_Settings_06_Device_Detected.pngGC3_System_Settings_07_Device_Added.png

5. Press RENAME then enter new device name then press DONE

GC3_System_Settings_08_Show_Device.pngGC3_System_Settings_09_Rename.png

6. Press GC3_Back_Arrow.png  or the HOME button to exit

GC3_System_Settings_10_Exit.png GC3_Home_Button_2.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.