2GIG GC3 - Add CT30, CT100, CT101 Thermostat

1. Press SYSTEM SETTINGS then enter the Installer Code 1561

GC3_System_Settings_01_Ready_To_Arm.png GC3_System_Settings_02_Enter_Code.png

2. Press SMART HOME SETTINGS then press ADD DEVICES

GC3_System_Settings_03_Smarthome_Select.png GC3_System_Settings_04_Smarthome_Main.png

3. The 2GIG GC3 enters learn mode, at the thermostat press the MENU button

GC3_System_Settings_05_Add_Devices.png Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg

4. "r1" displays and MATE appears under antenna icon, press MATE twice, MATE begins flashing

Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

5. If successful the 2GIG GC3 displays "Adding Device" and the thermostat displays LINK under antenna icon, press the MENU button to exit

GC3_System_Settings_06_Device_Detected.png Radio_Thermostat_CT100_Learn_04_Linked.jpg 

6. On the 2GIG GC3 press RENAME then enter a new thermostat name

Radio_Thermostat_CT100_Learn_05_2GIG_Learned.png Radio_Thermostat_CT100_Learn_06_2GIG_Rename.png

7. Press GC3_Back_Arrow.png or the HOME button to exit

Radio_Thermostat_CT100_Learn_07_2GIG_Exit.png GC3_Home_Button_2.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.