Qolsys IQ Panel 2 - Programming WiFi by WPS

1. Swipe down from time display to show drop-down box then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter your Master Code

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press WI-FI then check the right box to enable

WiFi_00_Advanced_Menu.jpg WiFi_01_Enable.jpg

4. Press WPS PUSH BUTTON then press CONNECT

WiFi_WPS_01_Select.png WiFi_WPS_02_Popup.png

5. Press the router's WPS button or enable the WPS option in the router settings

WiFi_WPS_03_Connect.png Router_WPS_Button.jpg

6. If successful IQ Panel 2 shows Connected, press BACK ARROW or HOME to exit

WiFi_04_Connected.jpg

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.