Simon XT - Installing A Recessed Door Sensor

The Interlogix Recessed Door Sensor is a magnetic contact sensor that provides concealed protection for doors.

0.1.png

Locate an area on your door or window to install the sensor and magnet. The image below will show the recommended placement.

Note: If you aren’t able to place the magnet in the frame or the sensor in the door, then you can reverse the mounting. This means you can place the magnet in the door and the sensor in the frame.

1.png

Drill a hole for the sensor 3/4” wide and 2.5” deep. Please take care when drilling to ensure proper fit. Then insert the sensor in the hole.

2.jpg

Drill a hole for the magnet 3/4” wide and 0.75” deep. Then insert the magnet in the hole. Be sure the magnet aligns with the sensor when the door closes.

3.jpg

Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.