1. Click on the GEAR icon at the bottom right then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press ACCESS CODES then press the box by an empty User Code

Access_Codes_00.jpg Add_Code_01.jpg

4. Enter the new User Code then press SAVE then CLOSE to exit User Code programming

Add_Code_02.jpg Add_Code_03.jpg

5. Press CLOSE to exit User programming

Exit_Programming_01_Exit.jpg Main_Screen.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.