Interlogix Concord - Delete Z-Wave Light Module

This requires an Alarm.com communication module

1. Hold Z-Wave button on cellular daughter-board until L2 LED flashes a 4-blink pattern

Z-Wave_Learn.jpg

2. Hold Z-Wave button again until L@ LED flashes a 2-blink pattern then press the light module mate button

Z-Wave_Mate_Button.jpg

3. If successful Concord keypad beeps and L2 LED turns ON for 1 minute

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.