2GIG GoControl - Programming A Keyfob

1. Press the Go Control icon at the bottom right then enter Installer Code 1561

Programming_-_Enter_Program_01.png Programming_-_Enter_Program_02.png

2. Enter 0 to disable or 1 to enable or press Left or Right Arrow buttons to scroll then press Down Arrow

3. Press Left or Right Arrow buttons to scroll and select Equipment Codes then press Down Arrow

4. If "Other" was selected in the previous step pick a number from 0000 to 9999 then press Down Arrow

5. Enter serial number from keyfob sticker or press SHIFT then LEARN then press any button on keyfob to learn then press OK

6. Press Down Arrow to continue

7. Enter 0 or 1 or press Left or Right Arrow buttons to select Equipment Age then press Down Arrow

8. Enter 0 to 4 or press Left or Right Arrow buttons to select keyfob panic type then press Down Arrow

9. Enter 0 or 1 or press Left or Right Arrow keys to select if unlock button can disarm then press Down Arrow

10. Press INSERT then enter 1st 3-digit word or press Left or Right Arrow buttons to scroll all words

11. Press INSERT then enter 2nd 3-digit word (up to 6 total) or press Left or Right Arrow buttons to scroll all words then press Down Arrow for next

12. Enter 0 or 1 or press Left or Right Arrow keys to select if keyfob arms with standard or no delay then press Down Arrow

13. Enter 0 or 1 or press Left or Right Arrow keys to select if sensor is supervised then press Down Arrow

14. Press EDIT NEXT for next keypad or SKIP to exit to go to Q4 Keypad Programming

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.