1. Help Center
  2. Wireless Burglary Sensors & Enviromental Sensors
  3. Motion Detectors

Qolsys Motion Detector Batteries

Avatar
Follow

Qolsys Motion Detectors

Press bottom tab to remove sensor from back plate, batteries are 2 AAA Alkaline

mceclip1.png

 Interlogix Motion Detectors

1. Press top tab to remove sensor from backplate

Interlogix_Motion_1.jpg

2. Hold top and bottom tabs then pull to remove sensor from front cover

Interlogix_Motion_2.jpg

Replace batteries then reassemble and replace sensor on backplate

Interlogix_Motion_3.jpg

Batteries are either 2 AA Alkaline or 1 SAFT LS-14500 3.6-Volt Lithium

Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section