1. Help Center
  2. Wireless Burglary Sensors & Enviromental Sensors
  3. Motion Detectors

Interlogix Motion Detector Batteries

Avatar
Follow

1. Press top tab to remove sensor from backplate

Interlogix_Motion_1.jpg

2. Hold top and bottom tabs then pull to remove sensor from front cover

Interlogix_Motion_2.jpg

3. Replace batteries then reassemble and replace sensor on backplate

Interlogix_Motion_3.jpg

4. Batteries are either 2 AA Alkaline or 1 SAFT LS-14500 3.6-Volt Lithium

Line.png

1. Remove motion from backplate by insterting screwdriver into bottom slot

Interlogix_Motion_4.jpg

2. Battery is SAFT LS14250 3.6 Volt Lithium battery

Interlogix_Motion_5.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section