2GIG-HD100 - WiFi Setup by Ethernet

Router Connection and Power

1. Plug Ethernet cable into the back of the camera and in the back of your network router

2. Plug power supply into AC outlet and wait 2 minutes until green LED turns ON

 

Alarm.com Settings

1. Login to Alarm.com customer website and press VIDEO

01_Home_Page.png

2. Press SETTINGS

02_Video_Page.png

3. Select camera

Select_Camera.png

4. Select Wireless Network

08_Add_Camera_-_Select_Wireless_Settings.png

5. Press SCAN

09_Add_Camera_-_Choose_Method.png

6. Select WiFi network then enter encryption then press NEXT

10_Add_Camera_-_Enter_Encryption.png

7. Unplug Ethernet cable then cycle power to the camera and wait 2 minutes for camera to boot

11_Add_HD100_Camera_-_Wireless_Complete.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.