Logo Help Center
  Contact Us Sign in
  1. Help Center
  2. 2GIG GC2 GoControl
  3. GC2 GoControl Installation Programming

GC2 GoControl - View Firmware Version

Update the firmware to keep system up to date, call Brinks Home Security to update

1. Press SECURITY then MENU

Enter_User_Programming_01.png Enter_User_Programming_02.png

2. Press TOOLBOX then enter Master Code

Enter_User_Programming_03.png Enter_User_Programming_04.png

3. Press RIGHT ARROW then VERSION

 2GIG_GC2_Version_01.jpg 2GIG_GC2_Version_02.jpg

4. Latest version is 1.19.3, press BACK or the HOME button to exit

2GIG_GC2_Version_03.jpg Home_Button_3.jpg

Was this article helpful?
1 out of 2 found this helpful
  • Facebook
  • Twitter
  • LinkedIn

Articles in this section

  • Programming a GoControl Z-Wave 3-Way/Standard Wall Switch into a GC2 Panel
  • Programming a GoControl Z-Wave Wall Dimmer Switch into a GC2 Panel
  • 2GIG GC2: Programming a GoControl Smart Plug-In Lamp Module
  • Programming a Door Window Contact Sensor into a GC2 Panel
  • Programming a GoControl Z-Wave Thermostat into a GC2 Panel
  • GC2 GoControl - Sensor Information Part 1
  • GC2 GoControl - Sensor Information Part 2
  • GC2 GoControl - Enter Installer Programming
  • GC2 GoControl - Exit Installer Programming
  • GC2 GoControl - Program TS-1 Touchscreen
See more

Are you currently
a customer with

Brinks
Home
Security?

Yes
See UPGRADE options NOW
No
Join BRINKS HOME SECURITY

Are you currently
a customer with

Brinks
Home
Security?

Yes
See UPGRADE options NOW
No
Join BRINKS HOME SECURITY

Are you currently
a customer with
Brinks Home Security?

Yes
See UPGRADE options NOW
No
Join BRINKS HOME SECURITY

© Help Center

Theme by Lotus Themes