IQ Panel 2 - Program CT100 Thermostat

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

 Door_Lock_01.jpg Door_Lock_02.jpg

2. Press ADVANCED SETTINGS then enter Installer Code 1111

Door_Lock_04.jpg Door_Lock_03.jpg

3. Press INSTALLATION then DEVICES

Door_Lock_06.jpg Door_Lock_05.jpg 

4. Press ADD DEVICE then PAIR

Door_Lock_07.jpg Door_Lock_08.jpg 

5. IQ Panel 2 enters Z-Wave learn mode

Door_Lock_09.jpg

5. At thermostat press MENU button, r1 displays and MATE appears under antenna icon

Radio_Thermostat_CT100_02.jpg Radio_Thermostat_CT100_01.jpg

6. Press MATE which should begin flashing

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_03.jpg

7. If successful LINK appears under antenna icon and IQ Panel 2 displays device settings

Radio_Thermostat_CT100_Link.jpg Radio_Thermostat_CT100_10a.jpg

8. Press NAME then select name or press CUSTOM NAME to create a name

Radio_Thermostat_CT100_10.jpg Radio_Thermostat_CT100_11.jpg

9. If Custom Name press CUSTOM DESC, enter name then press CHECK or KEYPAD icon

Radio_Thermostat_CT100_12.jpg Radio_Thermostat_CT100_13.jpg

10. Press ADD to save, press BACK or HOME to exit

Z-Wave_Thermostat_Add.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.