Qolsys IQ Panel 2 - Programming a CT100 Thermostat

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. At the thermostat press the MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

6. Press MATE again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

7. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

8. The IQ Panel 2 beeps and displays device settings, press NAME then select pre-determined name or press CUSTOM NAME to create your own name

Z-Wave_Thermostat_Add_03_Learned.jpg Z-Wave_Thermostat_Add_05_Name.jpg 

9. If Custom Descriptor was selected press CUSTOM DESC and enter Custom Name then press CHECK or KEYPAD icon

Z-Wave_Thermostat_Add_06_Custom_Name_01.jpg Z-Wave_Thermostat_Add_07_Custom_Name_02.jpg

10. Press BACK ARROW or HOME to exit

Z-Wave_Thermostat_Add_09_Exit.jpg

Want to learn more?

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.