IQ Panel 2 - Add Z-Wave Light Module

1. Swipe down from top clock display for Settings Tray then press SETTINGS

2. Press ADVANCED SETTINGS then enter Installer Code 1111

3. Press INSTALLATION then DEVICES

4. Press Z-WAVE DEVICES then ADD DEVICE

5. Press PAIR, IQ Panel 2 enters Z-Wave add mode

6. Press light module MATE button twice, if successful IQ Panel 2 displays device settings

 7. Press AUTOMATION then select if device turns on at Night or Evening then press OK

8. Press NAME and enter pre-determined name or select CUSTOM NAME to create a name

7. If CUSTOM NAME enter 10-character name then press CHECK or KEYBOARD icon to exit

8. Press ADD to save then press BACK or HOME to exit