Qolsys IQ Panel 2 - Add Z-Wave Light Module

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. Press the MATE button on the light module

Z-Wave_Add_02_Searching.jpg Z-Wave_Mate_Button_2.jpg

6. IQ Panel 2 should beep if successful, press AUTOMATION then select if device turns on at Night or Evening then press OK

Z-Wave_Add_04_Automation_1.jpg Z-Wave_Add_04_Automation_2.jpg

7. Press NAME then select pre-determined name or press CUSTOM DESCRIPTION to create a name

Z-Wave_Add_05_Name.jpg Z-Wave_Add_06_Custom_Name_01.jpg

8. If Custom Descriptor was selected enter Custom Name then press CHECK or KEYPAD icon

Z-Wave_Add_07_Custom_Name_02.jpg

9. Press BACK ARROW or HOME to exit

Z-Wave_Add_09_Exit.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.