IQ Panel 2 - Add Z-Wave Device

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

 Door_Lock_01.jpg Door_Lock_02.jpg

2. Press ADVANCED SETTINGS then enter Installer Code 1111

Door_Lock_04.jpg Door_Lock_03.jpg

3. Press INSTALLATION then DEVICES

Door_Lock_06.jpg Door_Lock_05.jpg 

4. Press ADD DEVICE then PAIR

Door_Lock_07.jpg Door_Lock_08.jpg 

5. IQ Panel 2 enters Z-Wave learn mode

Door_Lock_09.jpg 

GE Jasco Plug-in Lamp Appliance Module

Double Click Mate button

Mate_Button_2.jpg

Line.jpg

Qolsys IQ Siren

Press button at bottom of siren

IQ_Siren_Learn_Button.jpg

Line.jpg

GE Jasco Wall Dimmer Light Switch

Turn light switch on and off

Wall_Dimmer_Switch.jpg

Line.jpg

GE Jasco Wall AC Outlet

Double click button in the middle of outlet

Wall_Outlet.jpg

Line.jpg

Schlage Deadbolt Door Lock

1. Enter 6-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE logo or button then 0

Schlage_Lock_1.jpgSchlage_Lock_2.jpg 

Line.jpg

Kwikset Deadbolt Door Lock

Open battery compartment cover, press left SmartCode button then wait 2 minutes

Door_Lock_11.jpgDoor_Lock_11a.jpg

Line.jpg

Yale Touchscreen Deadbolt Door Lock

1. Touch screen with the back of your hand or fingers to activate

2. Enter 8-digit Master PIN Code then press Gear_Icon.jpg, lock should sound Happy tone

3. Press 7 then Gear_Icon.jpg, lock should sound Happy tone

4. Press 1 then Gear_Icon.jpg, lock should sound Happy tone and exit

Door_Lock_10.jpg

Line.jpg

2GIG GoControl TBZ-48 

1. Hold FAN button 5 seconds until SETUP then press UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpg GoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpg GoControl_Thermostat_Learn_06.jpg

Line.jpg

Alarm.com ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display 

T2000_Setup_03.jpg

Line.jpg

Alarm.com ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2.  Press ENTER button to select then press DOWN ARROW until NETWORK 

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit

Alarm.com_ADC-T3000_Learn_07.jpg

Line.jpg

Honeywell T6 Thermostat

Honeywell_T6_Thermostat.jpg

1. Press Menu then press right arrow until Z-Wave Setup then press Select

Honeywell_TH6320ZW2003_T6_Thermostat_Learn_1.jpg

2. Press Select at the Include screen to learn

Honeywell_TH6320ZW2003_T6_Thermostat_Learn_2.jpg

Line.jpg

Honeywell 8320Z1000 Thermostat

Honeywell_TH8320ZW1000_Front.jpg

1. Press SYSTEM then hold bottom buttons together until screen changes

Honeywell_TH8320_Z-Wave_Programming_1.jpg Honeywell_TH8320_Z-Wave_Programming_2.jpg

2. Press Arrow buttons until "rF20" then press Arrow buttons to change 0 to 1

Honeywell_TH8320_Z-Wave_Programming_3.jpg Honeywell_TH8320_Z-Wave_Programming_4.jpg

3. Thermostat enters Z-Wave enrollment, when finished press DONE to exit

Honeywell_TH8320_Z-Wave_Programming_5.jpg Honeywell_TH8320_Z-Wave_Programming_6.jpg

Line.jpg

Radio Thermostat CT-20 and GE Thermostat
Pull top cover toward you to remove then press MATE button to learn

Radio_Thermostat_CT20_Learn_2.jpg

Line.jpg

Radio Thermostat CT30, CT100, CT101

Radio_Thermostat_CT30_Front.jpg

1. At thermostat press MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_02.jpg Radio_Thermostat_CT100_01.jpg

2. Press MATE, which begins flashing, if successful LINK appears, press MENU to exit

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_Link.jpg

Line.jpg

Radio Thermostat CT110

Press left side Antenna button

Radio_Thermostat_CT110.jpg

Line.jpg

 

Trane TZ43 / TZ45 Thermostat

Trane_TZ45_Front_1.jpg

1. Press MENU button then press Scroll Down button to ZWave Install then press SELECT

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Scroll Up button for Yes to start Z-Wave enrollment

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. If successful display exits to main menu, press DONE button to exit

Trane_TZ45_Learn_05.png

Line.jpg

Linear GD00Z Garage Door Controller

Press the Mate button, controller sounds 1 beep then 3 beeps if successful

Linear_GD00Z-7_Garage_Door_Controller.jpg 

6. If successful IQ Panel 2 displays device settings, press NAME then select name

Z-Wave_Thermostat_Add_03_Learned.jpg Z-Wave_Thermostat_Add_05_Name.jpg

7. Press ADD then HOME to exit

Z-Wave_Thermostat_Add.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.