Qolsys IQ Panel 2 - Add Z-Wave Devices

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR or INCLUDE

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. Press the LEARN or PAIR button on the device

Z-Wave_Add_02_Searching.jpg

Plug-in Lamp or Light/Appliance Module

Double click the Mate button

Z-Wave_Mate_Button_2.jpg

IQ Siren

Press the button at the bottom of the siren.

IQ_Siren_Learn_Button.jpg

In-Wall Dimmer or On/Off Light Switch
Turn the light switch on and off

Picture4.png

In-Wall Outlet
Double click the button in the middle of the outlet.

final_nueve.jpg

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt
1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

GE Basic Thermostat
Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Radio Thermostat CT30, CT100 and CT101

1. Press the thermostat MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press MATE button again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

3. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

Trane Remote Energy Management Thermostat

Press the LEFT button twice then scroll down to Z-WAVE INSTALL and press SELECT then YES

final_2.jpg      final_cuatro.jpg

6. IQ Panel 2 should beep if successful, Press NAME then select pre-determined name or press CUSTOM DESCRIPTION to create a name

Z-Wave_Add_05_Name.jpg Z-Wave_Add_06_Custom_Name_01.jpg

7. If Custom Descriptor was selected enter Custom Name then press CHECK or KEYPAD icon

Z-Wave_Add_07_Custom_Name_02.jpg

8. Press BACK ARROW or HOME to exit

Z-Wave_Add_09_Exit.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.