Simon XTi - Deleting Z-Wave Light Module

1.  Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

 3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

 4. Press REMOVE DEVICE to start learning process

 Z-Wave_Delete_01.png Z-Wave_Delete_02.png

5. Press the MATE button on the light module, the Simon XTi beeps and deletes the device from the network, press CLOSE to exit

Z-Wave_Mate_Button.jpgZ-Wave_Delete_03.png

6. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

7. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.