IQ Panel - Add Z-Wave Device

1. Press SETTINGS then enter Installer Code 1111

Enter_Programming_01.jpg Enter_Programming_02.jpg

2. Press INSTALLATION then press HOME CONTROL DEVICES

Settings_Main_-_Installer.png 01_Installation_Main.png

3. Press ADD DEVICE then press PAIR

Z-Wave_Add_01_Main.png Z-Wave_Add_03_Add_Device.png

4. IQ Panel enters Z-Wave learn mode

Z-Wave_Add_04_Searching_for_Devices.png

Line.jpg

GE Jasco Light Appliance Module

Double click  MATE / LEARN button

Picture2.png

Line.jpg

Qolsys IQ Siren

Press the button on the bottom of the siren

IQ_Siren_Learn_Button.jpg

Line.jpg

GE Jasco Wall Dimmer Lght Switch

Turn on and off light switch.

Picture4.png

Line.jpg

GE Jasco Wall AC Outlet

Double click button in middle of outlet.

Picture3.png

Line.jpg

Schlage Lever Lock or Deadbolt

1. Enter 6-digit programming code provided in documentation from Schlage

2. Press Schlage logo or button then press 0 then wait 2 minutes to learn

Door_Lock_19.jpg

Line.jpg

Kwikset Deadbolt

Open battery cover, press left SmartCode button then wait 2 minutes to learn

Picture5.png

Line.jpg

Yale Touchscreen Deadbolt

1. Touch screen with the back of your hand or fingers to activate

2. Enter 4-8 digit Master PIN Code then press Gear_Icon.jpg

3. Press 7 then Gear_Icon.jpg

4. Press 1 then Gear_Icon.jpg then wait 2 minutes for the lock to learn

Door_Lock_10.jpg

Line.jpg

2GIG GoControl TBZ-48 

1. Hold FAN button 5 seconds until SETUP then press UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpg GoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpg GoControl_Thermostat_Learn_06.jpg

Line.jpg

Alarm.com ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display 

T2000_Setup_03.jpg

Line.jpg

Alarm.com ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2.  Press ENTER button to select then press DOWN ARROW until NETWORK 

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit

Alarm.com_ADC-T3000_Learn_07.jpg

Line.jpg

Honeywell T6 Thermostat

Honeywell_T6_Thermostat.jpg

1. Press Menu then press right arrow until Z-Wave Setup then press Select

Honeywell_TH6320ZW2003_T6_Thermostat_Learn_1.jpg

2. Press Select at the Include screen to learn

Honeywell_TH6320ZW2003_T6_Thermostat_Learn_2.jpg

Line.jpg

Honeywell 8320Z1000 Thermostat

Honeywell_TH8320ZW1000_Front.jpg

1. Press SYSTEM then hold bottom buttons together until screen changes

Honeywell_TH8320_Z-Wave_Programming_1.jpg Honeywell_TH8320_Z-Wave_Programming_2.jpg

2. Press Arrow buttons until "rF20" then press Arrow buttons to change 0 to 1

Honeywell_TH8320_Z-Wave_Programming_3.jpg Honeywell_TH8320_Z-Wave_Programming_4.jpg

3. Thermostat enters Z-Wave enrollment, when finished press DONE to exit

Honeywell_TH8320_Z-Wave_Programming_5.jpg Honeywell_TH8320_Z-Wave_Programming_6.jpg

Line.jpg

Radio Thermostat CT-20 and GE Thermostat
Pull top cover toward you to remove then press MATE button to learn

Radio_Thermostat_CT20_Learn_2.jpg

Line.jpg

Radio Thermostat CT30, CT100, CT101

Radio_Thermostat_CT30_Front.jpg

1. At thermostat press MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_02.jpg Radio_Thermostat_CT100_01.jpg

2. Press MATE, which begins flashing, if successful LINK appears, press MENU to exit

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_Link.jpg

Line.jpg

Radio Thermostat CT110

Press left side Antenna button

Radio_Thermostat_CT110.jpg

Line.jpg

 Trane TZ43 / TZ45 Thermostat

Trane_TZ45_Front_1.jpg

1. Press MENU button then press Scroll Down button to ZWave Install then press SELECT

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Scroll Up button for Yes to start Z-Wave enrollment

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. If successful display exits to main menu, press DONE button to exit

Trane_TZ45_Learn_05.png

5. Press NAME then select name or press CUSTOM NAME to enter a different name

Z-Wave_Add_06_Device_Settings.png Z-Wave_Add_05b_Device_Name_1.png

6. Press ADD to save and exit then press BACK ARROW or HOME button to exit

Z-Wave_Add_Exit.png Z-Wave_Add_07_Device_Added.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.