1. Help Center
  2. Qolsys IQ Panel
  3. IQ Panel Home Automation

IQ Panel - Delete Z-Wave Device

If the device is lost or defective

1. Press SETTINGS then enter Installer Code 1111

Enter_Programming_01.jpg Enter_Programming_02.jpg

2. Press INSTALLATION then press HOME CONTROL DEVICES

Settings_Main_-_Installer.png 01_Installation_Main.png

3. Press REMOVE DEVICE FROM PANEL then press to select device to delete

 02_Home_Control_Devices_Main.png Delete_Device_01_List.png

4. Press DELETE then OK to confirm

Delete_Device_02_List_Device_Checked.png Delete_Device_03_Confirm_Delete.png

5. Press BACK or the HOME button to exit

Delete_Device_04_Exit.png Home_Button.jpg

Was this article helpful?
0 out of 0 found this helpful

Articles in this section