IQ Panel 2 - Add Z-Wave Door Lock

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

 Door_Lock_01.jpg Door_Lock_02.jpg

2. Press ADVANCED SETTINGS then enter Installer Code 1111

Door_Lock_03.jpg Door_Lock_04.jpg

3. Press INSTALLATION then DEVICES

Door_Lock_05.jpg Door_Lock_06.jpg

4. Press Z-WAVE DEVICES then ADD DEVICE

Select_Z-Wave_Devices.png Door_Lock_07.jpg

5. Press PAIR, IQ Panel 2 enters Z-Wave learn mode

Door_Lock_08.jpg Door_Lock_09.jpg

Kwikset Deadbolt
Open battery cover and press left SmartCode button then wait 2 minutes

Door_Lock_11.jpgDoor_Lock_11a.jpg

Schlage Deadbolt
1. Enter 6-digit programming code provided in the Schlage documentation

2. Press SCHLAGE button or image then then wait 2 minutes to learn

Schlage_Lock_2.jpgSchlage_Lock_1.jpg

 Yale Touchscreen Deadbolt
1. Touch screen with the back of your hand or fingers to activate

2. Enter 8-digit Master PIN Code then press Gear_Icon.jpg, lock should sound Happy tone

3. Press 7 then Gear_Icon.jpg, lock should sound a Happy tone

4. Press 1 then Gear_Icon.jpg, lock should sound Happy tone and exit

Door_Lock_10.jpg

6. If successful lock settings appear

Door_Lock_13a.jpg

7. Press NAME and select name or press CUSTOM NAME to create a name

Door_Lock_14.jpg Door_Lock_13.jpg

7. If CUSTOM NAME press CUSTOM DESC then enter name then press CHECK or KEYPAD

Door_Lock_15.jpg Door_Lock_16.jpg

8. Press ADD to save then BACK ARROW or HOME to exit

Door_Lock_17.jpg Door_Lock_18.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.