Qolsys IQ Panel 2 - Programming A Z-Wave Door Lock

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Z-Wave_01_Installer_Menu.jpg Z-Wave_02_Devices.jpg

4. Press ADD DEVICE then PAIR

Z-Wave_Add_00_Main.jpg Z-Wave_Add_01_Main.jpg

5. Remove the battery cover from the Kwikset lock and press the LEFT button

Z-Wave_Add_02_Searching.jpg 

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt
1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

6. If successful lock settings appear, press NAME and select from pre-determined names or press CUSTOM NAME to enter your own name

Z-Wave_Kwikset_Lock_Add_02_Learned.jpg Z-Wave_Kwikset_Lock_Add_03_Name.jpg

7. If CUSTOM NAME was selected press CUSTOM DESC then enter name then press CHECK or KEYPAD icon then press ADD to save

Z-Wave_Kwikset_Lock_Add_04_Custom_Name.jpg Z-Wave_Kwikset_Lock_Add_04_Custom_Name.jpg 

8. Press ADD to finish then press BACK ARROW or HOME button to exit

Z-Wave_Kwikset_Lock_Add_05_Add.jpg Z-Wave_Thermostat_Add_09_Exit.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.