GC2 GoControl - Add Z-Wave Device

Programming

1. Press SERVICES, then press Z-Wave logo
1_Home_Disarmed.png 2_Z-Wave_Services.png
2. Press bottom right WRENCH button then enter Installer Code 1561
01_Z-Wave_Main.png 02_Enter_Code.png
3. Press ADD DEVICES button to enter Z-Wave learn mode
03_Toolbox_Add.png 04_Add_Device_1.png
GE Jasco Plug-in Lamp Appliance Module

Click Mate button twice

Z-Wave_Mate_Button_2.jpg

FortrezZ SSA1 Indoor Siren

Bring siren within 6' of GoControl then press Program Switch twice

FortrezZ_SSA1.jpg

Everspring SE812 Indoor Siren

Press LINK button inside battery compartment 3 times

Everspring_SE812_Siren_Strobe.jpg

GE Jasco Wall Dimmer Light Switch

Turn the light switch on and off

Picture4.png

GE Jasco Wall AC Outlet

Double click button in the middle of the outlet.

final_nueve.jpg

Schlage Deadbolt Door Lock

1. Enter 6-digit programming code provided in the Schlage documentation

2. Press SCHLAGE button then 0, The Schlage button flashes orange

hero_01.png

Kwikset Deadbolt Door Lock

Open the battery cover and press left SmartCode button

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt Door Lock

1. Touch screen with the back of your hand or fingers to activate

2. Enter 4 to 8-digit Master Code then press #, lock should sound Happy tone

3. Press 7 then # to learn, lock should sound Happy tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

GE Radio Thermostat CT20 Basic Thermostat
Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Alarm.com ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display 

T2000_Setup_03.jpg

Alarm.com ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2.  Press ENTER button to select then press DOWN ARROW until NETWORK 

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit

Alarm.com_ADC-T3000_Learn_07.jpg

Radio Thermostat CT30, CT100, CT101

1. Press thermostat MENU button, r1 displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press MATE button again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes__1_.jpg

3. If successful thermostat displays LINK under antenna icon, press MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes__2_.jpg

Radio Thermostat CT110 Thermostat

Radio_Thermostat_CT110.jpg

GoControl RCS Technologies TBZ-48 Thermostat

1. Hold FAN button 5 seconds until SETUP appears then UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpgGoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpgGoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpgGoControl_Thermostat_Learn_06.jpg

Trane Thermostat

1. Press LEFT button twice then press Scroll Down to Z-WAVE INSTALL and press SELECT

 Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Scroll Up button for Yes to begin Z-Wave enrollment

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. When finished display returns to main menu, press DONE to exit

Trane_TZ45_Learn_05.png

Linear GoControl Garage Door Controller

Press MATE button, Linear controller sounds 1 beep then 3 beeps if successful

Linear_GD00Z-7_Garage_Door_Controller.jpg

5. Learning may take up to 2 minutes, press BACK or HOME button to exit
05_Add_Device_2.png 06_Add_Device_3a.png
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.