GC2 GoControl - Delete Failed Z-Wave Device

 1. Press SERVICES, then press Yellow Triangle button by Z-Wave button

19_Remove_Home_Failed_Nodes.png 20_Remove_Services_Failed_Nodes.png

2. Enter Installer Code 1561 then select Z-Wave device to remove

02_Enter_Code.png 21_Remove_Failed_Thermostat.png

3. When finished press BACK twice or the HOME button to exit

22_Remove_Failed_Nodes_None.png 24_Remove_Failed_Nodes_nodes.png

Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.