Simon XTi - Add Z-Wave Door Lock

Simon XTi is compatible with Kwikset, Schlage, and Yale Z-Wave door locks 

1.  Press bottom right GEAR icon then press DOWN ARROW several times

Enter_Programming_01_Main__1_.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER button by Programming then enter Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press ADD DEVICE, Simon XTi enters Z-Wave learn mode

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

Schlage Deadbolt
1. Enter 6-digit programming code provided in the Schlage documentation

2. Press SCHLAGE logo or button then 0, Schlage button flashes orange

Schlage_Lock_1.jpgSchlage_Lock_2.jpg

Kwikset Deadbolt
Open battery cover and press left SmartCode button

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt

  1. Touch screen with the back of your hand or fingers to activate
  2. Enter 4 to 8-digit Master PIN code then press #, lock should sound Happy tone
  3. Press 7 then #, lock should sound Happy tone
  4. Press 3 then # to delete, lock sounds Happy tone if successful

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

6. Simon XTi beeps and displays Device xx added, press CLOSE several times to exit

Z-Wave_Add_04_Added.png Main_Screen.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.