Simon XTi - Adding Z-Wave Door Lock

1.  Press the GEAR icon then press DOWN ARROW several times until Programming appears

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press ADD DEVICE

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

5. Remove side screws then remove battery cover then press the left LEARN button

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt
1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

6. Simon XTi beeps if successful, press CLOSE twice to exit Z-Wave programming

Z-Wave_Add_04_Added.png Z-Wave_Add_05_Advanced_Menu_Exit.png

7. Press CLOSE twice again to exit programming

Z-Wave_Add_06_Z-Wave_Menu_Exit.png Z-Wave_Add_07_Installer_Menu_Exit.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.