Find the image of your door window sensor below to view instructions on how to complete your battery replacement.

 

Qolsys QS1135-840 Door Window Sensor

Insert a screwdriver into the slot found on the top/bottom of the cover to remove, then remove and replace 2 CR2032 batteries

Qolsys_Door_Sensor_Batteries.jpg

Video Instructions:

Line.jpg

Interlogix 60-362N-10 Door Window Sensor

Press end latch to remove the cover, then remove and replace the CR123A lithium battery

Interlogix_Door_Sensor_Batteries_2.jpg

Line.jpg

Interlogix TX-E201 Door/Window Sensor

Slide cover up to remove, then remove and replace the CR2032 lithium battery

Ecolink_Door_Sensor_Batteries_3.jpg

Line.jpg

Interlogix / GE Security TX-1012-01 Micro Door Sensor

Insert a coin or screwdriver into the slot and twist to open, using a screwdriver to then pry open the inside cover. Remove and replace CR2032 battery.

mceclip0.png

Line.jpg

Interlogix 60-688-95 Micro Door Sensor

Use a screwdriver to pry open the backplate, then pry off the cover. Remove and replace CR2032 battery.

mceclip1.png

Line.jpg

SW-ATT-V2 Mini Door/Window Sensor

Use a screwdriver to pry open the backplate, then pry off the cover. Remove and replace a CR2032 battery with the (+) face up.

001_-_SWV2.png 003_-_SWV2.png

 

Was this article helpful?
0 out of 1 found this helpful