2GIG-HD100 - WiFi and Alarm.com Setup

Connection to the Network

Connect camera to the network router by one of two methods

By Ethernet Cable

Plug Ethernet cable into back of camera and back of customer network router

 

By WPS WiFi Protected Setup Mode

1. Press and release Button A on camera, camera LED flashes yellow

2. Press and release WPS button on router or enable WPS learn mode in router programming

3. After 2 minutes the camera LED turns green if successful

 

Alarm.com Setup

1. From the customer website select Video

01_Home_Page.png

2. Select Settings

02_Video_Page.png

3. Select Add Video Device

03_Video_Settings.png

4. If the camera is found press Name then enter the camera name then press INSTALL

04_Add_HD100_Camera_-_Camera_Found.png

5. Alarm.com sends configuration data to the camera, this may take several minutes

05_Add_HD100_Camera_-_Configuring.png

6. When finished press Live View to view camera image

06_Add_HD100_Camera_-_Installation_Complete.png

7. If configuring WiFi press SETTINGS

07_Add_Camera_-_Live_View_Program_Wireless.png

8. Select camera from dropdown box

Select_Camera.png

9. Scroll down and select Wireless Network

08_Add_Camera_-_Select_Wireless_Settings.png

10. Press SCAN

09_Add_Camera_-_Choose_Method.png

11. Select wireless network

10_Add_Camera_-_Found_Networks.png

12. Enter WiFi encryption then press NEXT

10_Add_Camera_-_Enter_Encryption.png

13. Unplug Ethernet cable then cycle power to the camera and wait 2 minutes to reboot

11_Add_HD100_Camera_-_Wireless_Complete.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.