Qolsys IQ Panel 2 - Learning The Basics (Part 1)

Arming Stay

Arming to Stay mode arms all perimeter doors and windows and bypasses interior motion detectors

1. Press SYSTEM DISARMED then press ARM STAY

Arm_01.jpg Arm_Stay_01.jpg

2. The IQ Panel 2 arms immediately

 Armed_Stay.jpg

Arming Instant

Instant arming turns off entry delay to all perimeter sensors

1. Press ARM STAY or ARM AWAY then press the right side arrow

Arm_01.jpg Arm_Instant_01.jpg

 2. Press ENTRY DELAY to toggle OFF then press ARM STAY or ARM AWAY 

Arm_Instant_03.jpg Arm_Instant_02_Main.jpg 

3. IQ Panel 2 displays a countdown exit timer while arming

Arming_Timer.jpg Armed_Away.jpg

 Arming Away

Arming away arms all exterior doors and windows and interior motion detectors

1. Press SYSTEM DISARMED then press ARM AWAY

Arm_01.jpg  Arm_Away_01.jpg

2. The IQ Panel 2 displays an exit delay timer while arming

 Arming_Timer.jpg Armed_Away.jpg

Arming and Disarming

Arming Your Panel

1. Press the LOCK icon then press ARM STAY if staying indoors or ARM AWAY if leaving

Arm_01.jpg Arm_Stay_and_Away.jpg

2. IQ Panel 2 may displays a countdown timer if armed away

Arming_Timer.jpg Armed_Away.jpg

 

Disarming Your Panel

If armed AWAY and entering premise enter User Code

Disarm_02_Enter_Code.jpg Disarm_03_Disarmed.jpg

If inside while armed in Stay mode press LOCK icon then enter User Code

 Disarm_01.jpg Disarm_02_Enter_Code.jpg

Using The Emergency Panics

1. Press the panic icon at the bottom right of the display then select Police, Fire or Auxiliary Medical panic

Panics_01.jpg Panics_02.jpg

2. To silence alarm press CANCEL then enter your User Code
Panics_03.jpg Alarm_01.jpg

Add User Code

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS12345678912

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Master Code

Enter_Program_04_Enter_Code.jpg Enter_Program_03_Settings_Menu.jpg

3. Press USER MANAGEMENT then press ADD USER button

User_Codes_01.jpg User_Codes_02_Main.jpg

4. Press NAME then enter up to 10 character name then press bottom right KEYBOARD icon

User_Codes_03_Add_Main.jpg User_Codes_04_Enter_Name.jpg

5. Press USER CODE then enter User Code then press > button

User_Codes_05_Enter_Code.jpg User_Codes_05a_Enter_Code.jpg

6. Enter User Code again to confirm then press > button

User_Codes_05b_Enter_Code.jpg 

7. (Optional) press TYPE then select if a Standard, Master or Guest User Code

User_Codes_07_User_Type.jpg

8. If User Code is temporary press EXPIRATION DATE then select Month, Day and Year this User Code expires

User_Codes_08_Expiration.jpg User_Codes_08a_Expiration.jpg

9. Press ADD USER to finish then press BACK ARROW or HOME to exit

User_Codes_09_Add_User.jpg User_Codes_10_Exit.jpg

Change the Master Code

1. Press or swipe down clock display at top for Settings drop down then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Master Code

Enter_Program_04_Enter_Code.jpg Enter_Program_03_Settings_Menu.jpg

3. Press USER MANAGEMENT then press the PENCIL icon by the MASTER User

User_Codes_01.jpg User_Codes_20_Master_Select.jpg

4. (Optional) Press end of current NAME then press X to delete then enter new name then press CHECK or KEYPAD icon

User_Codes_22a_Master_Name.jpg User_Codes_22b_Master_Name.jpg

5. Set the cursor by pressing in front of the old Master Code then press  to delete then enter new Master Code and press 

User_Codes_24a_Master_Enter_Code.jpg User_Codes_24b_Master_Enter_Code.jpg

6. Set the cursor by pressing in front of the old Master Code again then press  to delete then enter new Master Code and press User_Code_Check.png

User_Codes_24c_Master_Confirm_Code.jpg User_Codes_25_Master_Confirm_Code.jpg

7. Press SAVE to save and exit

User_Codes_26_Master_Done.jpg User_Codes_27_Master_Exit.jpg

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.