Qolsys IQ Panel 2 - Learning The Basics (See All)

Qolsys IQ Panel 2 - Arming Stay

Arming to Stay mode arms all perimeter doors and windows and bypasses interior motion detectors

1. Press SYSTEM DISARMED then press ARM STAY

Arm_01.jpg Arm_Stay_01.jpg

2. The IQ Panel 2 arms immediately

 Armed_Stay.jpg

Qolsys IQ Panel 2 - Arming Instant

Instant arming turns off entry delay to all perimeter sensors

1. Press ARM STAY or ARM AWAY then press the right side arrow

Arm_01.jpg Arm_Instant_01.jpg

 2. Press ENTRY DELAY to toggle OFF then press ARM STAY or ARM AWAY 

Arm_Instant_03.jpg Arm_Instant_02_Main.jpg 

3. IQ Panel 2 displays a countdown exit timer while arming

Arming_Timer.jpg Armed_Away.jpg

 Qolsys IQ Panel 2 - Arming Away

Arming away arms all exterior doors and windows and interior motion detectors

1. Press SYSTEM DISARMED then press ARM AWAY

Arm_01.jpg  Arm_Away_01.jpg

2. The IQ Panel 2 displays an exit delay timer while arming

 Arming_Timer.jpg Armed_Away.jpg

Qolsys IQ Panel 2 - Arming and Disarming

Arming Your Panel

1. Press the LOCK icon then press ARM STAY if staying indoors or ARM AWAY if leaving

Arm_01.jpg Arm_Stay_and_Away.jpg

2. IQ Panel 2 may displays a countdown timer if armed away

Arming_Timer.jpg Armed_Away.jpg

 

Disarming Your Panel

If armed AWAY and entering premise enter User Code

Disarm_02_Enter_Code.jpg Disarm_03_Disarmed.jpg

If inside while armed in Stay mode press LOCK icon then enter User Code

 Disarm_01.jpg Disarm_02_Enter_Code.jpg

Using The Emergency Panics

1. Press the panic icon at the bottom right of the display then select Police, Fire or Auxiliary Medical panic

Panics_01.jpg Panics_02.jpg

2. To silence alarm press CANCEL then enter your User Code
Panics_03.jpg Alarm_01.jpg

Qolsys IQ Panel 2 - Add User Code

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS12345678912

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Master Code

Enter_Program_04_Enter_Code.jpg Enter_Program_03_Settings_Menu.jpg

3. Press USER MANAGEMENT then press ADD USER button

User_Codes_01.jpg User_Codes_02_Main.jpg

4. Press NAME then enter up to 10 character name then press bottom right KEYBOARD icon

User_Codes_03_Add_Main.jpg User_Codes_04_Enter_Name.jpg

5. Press USER CODE then enter User Code then press > button

User_Codes_05_Enter_Code.jpg User_Codes_05a_Enter_Code.jpg

6. Enter User Code again to confirm then press > button

User_Codes_05b_Enter_Code.jpg 

7. (Optional) press TYPE then select if a Standard, Master or Guest User Code

User_Codes_07_User_Type.jpg

8. If User Code is temporary press EXPIRATION DATE then select Month, Day and Year this User Code expires

User_Codes_08_Expiration.jpg User_Codes_08a_Expiration.jpg

9. Press ADD USER to finish then press BACK ARROW or HOME to exit

User_Codes_09_Add_User.jpg User_Codes_10_Exit.jpg

Qolsys IQ Panel 2 - Change the Master Code

1. Press or swipe down clock display at top for Settings drop down then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Master Code

Enter_Program_04_Enter_Code.jpg Enter_Program_03_Settings_Menu.jpg

3. Press USER MANAGEMENT then press the PENCIL icon by the MASTER User

User_Codes_01.jpg User_Codes_20_Master_Select.jpg

4. (Optional) Press end of current NAME then press X to delete then enter new name then press CHECK or KEYPAD icon

User_Codes_22a_Master_Name.jpg User_Codes_22b_Master_Name.jpg

5. Set the cursor by pressing in front of the old Master Code then press  to delete then enter new Master Code and press 

User_Codes_24a_Master_Enter_Code.jpg User_Codes_24b_Master_Enter_Code.jpg

6. Set the cursor by pressing in front of the old Master Code again then press  to delete then enter new Master Code and press User_Code_Check.png

User_Codes_24c_Master_Confirm_Code.jpg User_Codes_25_Master_Confirm_Code.jpg

7. Press SAVE to save and exit

User_Codes_26_Master_Done.jpg User_Codes_27_Master_Exit.jpg

Checking System Status

1. Press the Brinks Home Security logo at the top right then press Messages/Alerts/Alarms

Status_01.jpgStatus_02.jpg

2.  View system status then swipe left or right to exit

Status_03a.jpgStatus_03b.jpg

Checking Sensor Status

Press the pane to the right to view

Sensor_Status_01.jpg

Delete A User Code

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Master Code

Enter_Program_04_Enter_Code.jpg Enter_Program_03_Settings_Menu.jpg

3. Press USER MANAGEMENT then press TRASH icon by user to delete

User_Codes_01.jpg  User_Codes_Delete_01_Select.jpg

4. Press OK to confirm then press BACK ARROW or HOME to exit

User_Codes_Delete_02_Confirm.jpg User_Codes_Delete_03_Deleted.jpg

Fixing Chime Feature

1. Press or swipe down clock display at top for Menu then press SETTINGS, press ADVANCED SETTINGS

2. Enter Master Code then press SOUND then press the drop-down icon to the right of VOLUME

3. Move sliders to change VOICES VOLUME, BEEPS AND CHIME or MEDIA VOLUME then press CLOSE to exit then BACK or HOME icon to exit

Live Video Streaming

Note: This requires IQ Panel 2 firmware 2.1.0 and higher and the following Alarm.com cameras

  • ADC-V521IR Indoor camera - Video and Audio streaming
  • ADC-V522IR Indoor camera - Video and Audio streaming
  • ADC-V722W Indoor Outdoor camera - Video streaming only
  • ADC-V725 Indoor Outdoor Mini Bullet Camera - Video streaming only
  • ADC-VC726 Indoor Outdoor Mini Bullet Camera - Video streaming only
  • ADC-VC825 Dome camera - Video streaming only
  • ADC-VC826 Dome camera - Video streaming only
  • Skybell HD - Video and Audio streaming
  • Skybell Slim - Video and Audio streaming

Account must have Service plan with Video Monitoring and Basic Doorbell enabled

1. Click on Video then Settings then Stream Video to Security Panel Screen

Qolsys_Live_Streaming_01.jpg

2. Move sliders on cameras to the right to enable

Qolsys_Live_Streaming_02.jpg

3. On the Qolsys IQ Panel 2 swipe to camera display then select camera then click to enlarge

Streaming Video To The Display

This feature only works with the latest IQ Panel 2 firmware and these Alarm.com Cameras

ADC-V521IR Indoor Camera

ADC-V522IR Indoor Camera

ADC-V722W Indoor / Outdoor Camera

ADC-V725 Indoor / Outdoor Camera 

ADC-V726 Indoor / Outdoor Camera

ADC-VC825 Indoor / Outdoor Dome Camera

ADC-VC826 Indoor / Outdoor Dome Camera

1. Open Internet browser and login to Alarm.com customer website, click on VIDEO then SETTINGS then STREAM VIDEO TO SECURITY PANEL SCREEN.

Stream_Video_to_Panel_1.png

2. Move slider to the right to enable steaming video then move camera slider to the right to enable that camera

Stream_Video_to_Panel_2.png

3. Swipe left or right on the IQ Panel 2 to to Live Video display to select camera

Stream_Video_to_Panel_3.png

4.  Press the video image to display full size

Stream_Video_to_Panel_4.png

Using The Photo Frame Feature

1. Load 800x480 pixel photos on a Micro-SD card then insert into the slot on the right side of the panel

Firmware_Update_SD_Card_01.jpg

2. Press or swipe down clock display at top for Settings Drop Down then press PHOTO FRAME

Enter_Program_01_Main.jpg Photo_Frame_01_Dropdown_Select.png

3. Press PLAY to view slideshow of all images

Photo_Frame_02_Main_Play.png Photo_Frame_02a_Main_Play_Full_Size_Image.png

4. To delete images press DELETE then select images then press DELETE again 

Photo_Frame_03_Main_Delete.png Photo_Frame_03a_Main_Delete_Select_Photo.png

5. To add images press ADD then select images then press ADD NEW PHOTOS or REPLACE ALL PHOTOS

Photo_Frame_04_Main_Add.png Photo_Frame_04a_Add_New.png

 

6. Press SETTINGS then select settings to change

Photo_Frame_05_Main_Settings.png Photo_Frame_05a_Settings.png

7. Press DURATION then select how many minutes before slideshow or clock displays

Photo_Frame_05a_Settings_Duration.png

8. Press EFFECTS to display how images display during slideshow

Photo_Frame_05b_Settings_Effects.png 

9. Press SHUFFLE to toggle random pictures ON or OFF

Photo_Frame_07_Settings_Shuffle.png

10. Press DISPLAY TYPE to select between Photo Frame or Weather Clock display

Photo_Frame_05c_Settings_Display_Type.png

11. Press BACK ARROW or HOME to exit

Photo_Frame_06_Exit.png

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.