Indoor Camera- WiFi Setup by Access Point

1. Hold back button or insert paperclip into hole for 6 seconds until camera LED flashes white

2. Camera LED flashes white

3. In smartphone WiFi settings, find ALARM (Last 6 digits of MAC address) then CONNECT


4. Open a web browser and enter, camera configuration appears, select language


5. Press SCAN FOR WI-FI NETWORKS then select WiFi network


6. Press SECURITY KEY then enter WiFi encryption key then press SAVE then OK to exit


7. Wait 2 minutes, camera LED turns green if successful or red if failure

Was this article helpful?
0 out of 2 found this helpful



Please sign in to leave a comment.