2GIG GoControl - Sensor Information Sheets

2GIG-CO1-345 CO Detector - Information Sheet

2GIG-CO1-345_CO_Detector.jpg

Information

  • Discontinued, replaced by 2GIG-CO3-345
  • Sensor Life: 6 years
  • 345 MHz sends a supervisory signal every 70 minutes
  • Range: 100 ft recommended
  • Temperature Rating: 32 to 100 degrees
  • Trouble beeps can be silenced once for 7 minutes by pressing test button

Batteries

  • CR123 A or DL123A 3V Lithium, 1 year estimated battery life

Panel Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Vario

Installation

  • Wall mounted at least 6 inches from ceiling or ceiling mounted at least 12 inches away from wall
  • Install within 10 feet of sleeping areas

Programming

  • Remove from base to learn
  • Program as loop 1

Testing

  • Press and release Test button to test smoke sounder
  • Press Test for 20 seconds to trigger smoke detector test to panel

 LED Status

  • Normal = Green flash every 12 seconds
  • Alarm/Test = Red flash every 12 seconds, 4 sounder beeps
  • Power Up = Red, yellow, and green LED's flash every 12 seconds, 1 chirp when power-up is complete
  • Trouble = Yellow flash every 6 seconds, 1 chirp every 45 seconds
  • Low Battery = Yellow flash every 12

 

2GIG-CO3-345 CO Detector - Information Sheet

2GIG-CO3-345_Carbon_Monoxide_Detector_Top_Larger.jpg

Information

  • Sensor Life: 5 years
  • 345 MHz sends a supervisory signal every 70 minutes
  • Range: 100 ft recommended
  • Temperature Rating: 40 to 100 degrees
  • 85dB sounder
  • Trouble beeps can be silenced once for 7 minutes by pressing test button
  • Program as loop 1

Batteries

  • CR123 A or DL123A 3V Lithium, 1 year estimated battery life

Panel Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Rely
  • 2GIG Vario
  • Linear PERS-4200X

Installation

  • Wall mounted at least 6 inches from ceiling or ceiling mounted at least 12 inches away from wall
  • Install within 10 feet of sleeping areas

Programming

  • Remove from base to learn
  • Program as loop 1

Testing

  • Press and release Test button to test smoke sounder
  • Press Test for 20 seconds to trigger smoke detector test to panel

 LED Status

  • Normal = Green flash every 12 seconds
  • Alarm/Test = Red flash every 12 seconds, 4 sounder beeps
  • Power Up = Red, yellow, and green LED's flash every 12 seconds, 1 chirp when power-up is complete
  • Trouble = Yellow flash every 6 seconds, 1 chirp every 45 seconds
  • Low Battery = Yellow flash every 12 seconds, 1 chirp every 45 seconds
  • Sensor End of Life = Red LED flashes every 10 seconds, 1 beep every 45  seconds
  • Tamper = Red, yellow, and green flash every 12 seconds

 

2GIG-DW10-345 Door Sensor - Information Sheet

dw1000000.JPG

Information

  • Door / Window contact with a connector for external sensor wiring
  • 345 MHz sends a supervisory signal every 70 minutes
  • Range: 100 ft recommended
  • Temperature Rating: 32 to 120 degrees

Batteries

  • 2 CR2032 3V Lithium, 5 year estimated battery life

Panel Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Rely
  • 2GIG Vario
  • Linear PERS-4200X

 

2GIG-FF-345 FireFighter - Information Sheet

2GIG-FF-345_Top_03.PNG

Information

  • Manufactured by Encore Controls
  • Reports when siren internal sounder activates
  • 1 rectangular and 1 circular version, both function identically
  • Monitors existing hardwire Smoke Detectors
  • Smoke Detectors must support UL Temporal 3 tones (3 beeps + pause + 3 beeps)
  • 345 MHz sends a supervisory signal every 64 minutes
  • Estimated battery life: 5 years

Batteries

  • 3V CR123A
  • DL123A 3V Lithium

Part Numbers

  • Tri-Ed
  • 2GI-ECFF345

Panel Compatibility 

  • Honeywell
  • Ademco
  • Vista
  • Lynx
  • 2GIG GC2
  • 2GIG GC3
  • 2GIG Vario

Installation

  • Mount 6" with microphone facing smoke detector

Programming

  • Manually enter the serial number on sticker or press internal learn button
  • 2GIG Equipment Code 0637 [HW D/W 5816]
  • Loop 2, Sensor Type 9 (Fire) or 16 (Fire Verification)

LED Indicator

  • Off = Normal
  • Yellow Flash = Smoke Detector Sounder detected
  • In Alarm = Red 3 seconds, then red flash
  • Tamper = Red 3 seconds
  • Power Up = Red flash + green flash
  • Test = Green 3 seconds

Sensor Test

  • May require 5 to 30 seconds after activation before alerting panel

 

2GIG-FT1-345 Flood Temp Sensor - Information Sheet

2GIG-FT1-345_Flood_Temperature_Sensor.jpg

Information

  • Up to 3 independent sensors can be programmed
  • Flood/water (using external probe): Activates 3 minutes after water detection
  • High temperature: Activates if 95 degrees for more than 5 minutes
  • Low temperature: Activates if 41 degrees or lower for more than 5 minutes
  • 345 MHz sends a supervisory signal every 70 minutes
  • Range: 100 ft recommended
  • Operating Temperature: 32 to 120 degrees

Batteries

  • 2 CR2032 3V Lithium, 5 year estimated battery life

Panel Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Rely
  • 2GIG Vario
  • Linear PERS-4200X

 

2GIG-GB1-345 Glassbreak Detector - Information Sheet

2GIG-GB1-345_Glassbreak_Top_New.jpg

Information

  • 345 MHz sends supervisory signal every 70 minutes
  • Range: 100 ft recommended
  • 15 ft detection range

Battery

  • 2 CR123A 3V, 5 year estimated battery life

 

2GIG-GB1-345_Glassbreak_Bottom_New.jpg

Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Rely
  • 2GIG Vario

Sensor Test

  • Hold Test button for 2 seconds, red LED turns on, green LED blinks once
  • Activate glassbreak tester by the window, green LED senses crash, red LED senses thud
  • Sensor tests ends after 90 seconds 

 

2GIG-Panic1-345 Remote Panic - Information Sheet

2GIG-PANIC1-345_Complete.jpg

Information

  • 345 MHz
  • Range: 100 ft recommended
  • Temperature Rating: 32 to 120 degrees
  • Available as a belt clip, watch, or pendant
  • Water resistant but not waterproof c
  • Can be used in the shower but no while in the bath or swimming

Battery

  • CR2032 3V Lithium, up to 3 year estimated battery life

Panel Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Vario

Operation

  • Hold button 3 to 4 seconds until LED turns on to activate

 

2GIG-PIR1-345 Motion Detector - Information Sheet

pir333.JPG

 

Information

  • 345 MHz sends a supervisory signal every 70 minutes
  • Range: 100 ft recommended
  • Temperature 32 to 120 degrees standard
  • Temperature 50 to 90 degrees if set for pet immunity

Battery

  • CR2032 3V Lithium, up to 5 year estimated battery life

Panel Compatibility

  • 2GIG GC2 Go Control
  • 2GIG GC3
  • 2GIG Rely
  • 2GIG Vario
  • Linear PERS-4200X

Pet Immunity 

  • Mount 7.5' from floor flat against wall (no downward tilt)
  • Do not face windows, tall furniture or stairs
  • Set back jumper to low
  • Set pet jumper by weight 15K = 33 pounds or 25K = 55 pounds

Testing

  • Place magnet over arrow on side of motion for 3 seconds
  • LED turns ON then flashes on movement
  • Move in front of motion to test
  • Test exits after 1 minute

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.