2GIG GC2 - Home Automation Programming (See All)

Add Z-Wave Light Module

1. Press SERVICES then Z-Wave logo then select then press SWITCHES & CONTROLS

2. Select light then press ON or OFF or if light has dimmer functions press left and right light buttons, press BACK or HOME button to exit

Learn Device

1. Press SERVICES then Z-Wave logo then press bottom right WRENCH button

Step 2. Enter Installer Code 1561 then press ADD DEVICES

Step 3. Press Mate button on Z-Wave device or enter Z-Wave device programming to delete, press BACK to exit

Delete Devices

Step 1. Press SERVICES then Z-Wave logo then press bottom right WRENCH button

Step 2. Enter Installer Code 1561 then press REMOVE DEVICES

Step 3. Press-Mate button on Z-Wave device or enter Z-Wave device programming to delete, press BACK or the HOME button to exit

Delete Failed Z-Wave Devices

Step 1. SERVICES button turns orange if failed Z-Wave devices, press SERVICES then orange Triangle button then enter Installer Code 1561

Step 2. Select failed device to remove then press BACK button to exit

Rediscover Network

Step 1. Press SERVICES then Z-Wave logo then press bottom right WRENCH button

Step 2. Enter Installer Code 1561 then press ADVANCED TOOLBOX

Step 3. Press REDISCOVER NETWORK and after several minutes display will return to

Advanced toolbox menu, press BACK to exit

View All Devices

Step 1. Press SERVICES then Z-Wave logo then press bottom WRENCH button

Step 2. Enter Installer Code 1561 then press ADVANCED TOOLBOX then VIEW ALL DEVICES

Step 3. Scroll devices with the arrow keys or press BACK or the HOME button to exit

Control Lighting

Step 1. Press SERVICES then Z-Wave logo then select then press SWITCHES & CONTROLS

Step 2. Select light then press ON or OFF or if light has dimmer functions press left and right light buttons, press BACK or HOME button to exit

Control Door Locks

Step 1. Press SERVICES then Z-Wave logo then select then press DOOR LOCKS

Step 2. Select lock then press lock icon to lock or unlock, press BACK or the HOME button to exit

Control Garage Door Openers

Step 1. Press SERVICES then Z-Wave logo then select then press SWITCHES & CONTROLS

Step 2. Select Garage Door then press UP/DOWN button to control, press BACK or HOME button to exit

Control Thermostats

Step 1. Press SERVICES then Z-Wave logo then select then press THERMOSTATS

Step 2. Select thermostat to control then use arrows to set fan control and temperature, press BACK or the HOME button to exit

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.