Simon XTi - Home Automation Programming (See All)

 

Adding Z-Wave Devices

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

 3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

 4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

Plug-in Lamp or Light/Appliance Module

Z-Wave_Mate_Button_2.jpg

Double click the Mate button

IQ Siren

Press the button at the bottom of the siren.

IQ_Siren_Learn_Button.jpg

In-Wall Dimmer or On/Off Light Switch

Turn the light switch on and off

Picture4.png

In-Wall Outlet

Double click the button in the middle of the outlet.

final_nueve.jpg

Locks

Schlage Deadbolt

1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt

Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt

1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

Thermostats

GE Basic Thermostat

Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Radio Thermostat CT30, CT100 and CT101

1. Press the thermostat MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press MATE button again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

3. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

Trane Remote Energy Management Thermostat

Press the LEFT button twice then scroll down to Z-WAVE INSTALL and press SELECT then YES

final_2.jpg      final_cuatro.jpg

5. Once added the Simon XTi beeps and displays "Device xx added", press CLOSE to exit

Z-Wave_Add_04_Added.png

6. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

7. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

GE IS-ZW-TSTAT-100 Thermostat

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

 4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

5. Pull the thermostat top cover toward you to remove then press the MATE button 

9.JPG

6. Simon XTi beeps if successful, press CLOSE to exit

Z-Wave_Add_04_Added.png

7. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Deleting Trane Thermostats

1.  Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

 3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

4. Press REMOVE DEVICE to start deleting process

Z-Wave_Delete_01.png Z-Wave_Delete_02.png

5. On the thermostat press the MENU button then scroll down to ZWave Install and press SELECT button

 

6. Press UP ARROW to delete then button below DONE to exit

 

7. Simon XTi beeps and displays “Device deleted”, press CLOSE to exit  

Z-Wave_Delete_03.png

8. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

9. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Adding Z-Wave Siren

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png 

5. Press the PROGRAM SWITCH on the back of the siren twice until the Simon XTi beeps

22.JPG

6. The Simon XTi displays "Device xx added", press CLOSE to exit

Z-Wave_Add_04_Added.png

7. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Deleting Z-Wave Light Module

1.  Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

 3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

 4. Press REMOVE DEVICE to start learning process

 Z-Wave_Delete_01.png Z-Wave_Delete_02.png

5. Press the MATE button on the light module, the Simon XTi beeps and deletes the device from the network, press CLOSE to exit

Z-Wave_Mate_Button.jpgZ-Wave_Delete_03.png

6. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

7. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

 

Deleting Z-Wave Siren

1.  Press the GEAR icon at the bottom right then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then press REMOVE DEVICE

Interactive_Services_01_Main_Select.jpg Z-Wave_Delete_01.png

4. The Simon XTi enters Z-Wave delete mode

Z-Wave_Delete_02.png

5. Press the Program Switch until you hear the Simon XTi beep

22.JPG

 6. After a few seconds the Simon XTi beep and shows Device deleted, press CLOSE to exit  

Z-Wave_Delete_03.png

7. Press CLOSE twice to exit Z-Wave menu then Interactive Services menu

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Deleting Kwikset Door Locks

1.  Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

 3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

4. Press REMOVE DEVICE to start deleting process

Z-Wave_Delete_01.png Z-Wave_Delete_02.png

5. Remove 2 side screws and slide battery cover upward to remove then press left button

 

6. Simon XTi beeps and displays “Device deleted”, press CLOSE to exit  

Z-Wave_Delete_03.png

7. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg 

Updating The Thermostat

If your Thermostat is not showing up on the Simon XTi or Alarm.com then you may need to update it on your panel.

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press UPDATE 2WTTS then THERMOSTATS

Update_2WTTS_01_Z-Wave_Menu.png Update_2WTTS_02_Update_Menu.png

5. Press UPDATE, when finished press CLOSE to exit

Update_2WTTS_03_Thermostat_Menu.png Update_2WTTS_04_Updating.png

6. Press CLOSE twice to exit 

Update_2WTTS_05_Close_Thermostat_Menu.png Update_2WTTS_06_Close_Update_Menu.png

7. Press CLOSE to exit Z-Wave Menu then Interactive Services

Update_2WTTS_07_Close_Z-Wave_Menu.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

 

 

 

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.