Qolsys IQ Panel - Learning the Basics

Arming To Stay Mode

1. Press PRESS TO ARM then press ARM STAY

Arm_Stay_01_Main.png Arm_Stay_02_Arm_Screen.png

2. A countdown timer appears during exit delay

Arm_Stay_03_Exit_Delay.png Arm_Stay_04_Armed_Stay.png

Disarming

If armed Away mode enter your User code

Disarm_-_Armed_Away_Enter_Code.png Home_Screen.png

If armed in Stay mode press PRESS TO DISARM then enter your User Code

Disarm_Armed_Stay.png Disarm_-_Armed_Away_Enter_Code.png

Arming To Away Mode

1. Press PRESS TO ARM button then press ARM AWAY

Arm_Away_01_Main.png Arm_Away_02_Arm_Screen.png

2. A countdown timer appears during exit delay 

Arm_Away_04_Armed_Away.png Arm_Away_03_Exit_Delay.png

Arming Instant

Instant arming arms all perimeter sensors without an entry delay

1. Press PRESS TO ARM then press ENTRY DELAY ON to toggle OFF

Arm_Instant_01_Home_Screen.png Arm_Instant_02_Main_Screen.png

2. Press ARM STAY or ARM AWAY

Arm_Instant_03_Main_Screen_Entry_Delay_Off.png Arm_03_Exit_Delay.png

Online Demo

The IQ Panel Emulator is used for viewing and navigating online, click the image below

IQ_Panel_Crop.jpg

Checking Cellular Signal Strength

1. Press SETTINGS then enter the Installer Code 1111 or 2222 

Settings_IQ_Panel.jpg Installer_Code_IQ_Panel.jpg

2. Press ABOUT then scroll down to CELLULAR SIGNAL STRENGTH

About_Screen.jpg Scroll_Down_Screen__2_.jpg

 

2. The minimum signal strength should be no less than 2 bars, press BACK or HOME button to exit

Signal_Strength_Screen.jpg

Change Sensor Chimes

1. Press APPS then press SOUND

1.png 2.png

2. Press EDIT CHIMES then press the PENCIL icon by the sensor to program

3.png 4.png

3. Press the drop-down box by CHIME TYPE and select the sound

5.png 6.png

 4. Finish by pressing SAVE then BACK ARROW to exit

7.png

Volume Control

1. Press APPS then press SOUND

1.png 2.png

2. Press VOLUME then set the volume level then press OK to save

1.png 2.png

3. Press BACK ARROW to exit

Sounds_01.jpg Home_Screen.png

Checking System And Sensor Status

1. Press STATUS to view sensor status

1.png 2.png

2. Press ALERTS to view recent trouble conditions 

4.png

3. Press ALARMS for recent alarm history

5.png

4. Press HISTORY to view all the recent events then press BACK ARROW to exit

Status_Exit.png

Clearing Alarm Memory

ACKNOWLEDGE to check all events then press YES at popup confirmation

Alarm_Memory_04_Alarms_Ack.png 9.png

Viewing Images On The Display

Press CAMERA

1.png

"Disarm Photos" allows you to view the images taken when your system is disarmed

"Alarm Photos" gives you access to view images taken when your system goes into an alarm

"Image Sensor" displays pictures taken by the Image Motion detector if available

6.png

Using The Panic Buttons

1. Press the PANIC button then hold Police, Fire or Medical panic for 3 to 4 seconds to activate

IQ_Panel_Front.jpg Panic_01_Main.jpg

2. To silence alarm press CANCEL then enter your Master Code

Panic_02_Police.jpg Panic_05_Enter_Code.jpg

Bypassing A Sensor

Bypassing disarms one or more sensors while the rest of your sensors are armed

1. Press READY TO ARM then on the right side press to select open sensors

Bypass_01_Home_Screen_Not_Ready.png Bypass_02_Arm_Screen_with_Sensor_Open.png

2. Press ARM STAY or ARM AWAY

Bypass_03_Arm_Screen_with_Sensor_Checked.png Bypass_03_Arming.png

Note: Once you have disarmed your system, your sensors will go back to default

Silence And Reset Alarm

1. Press DISARM then enter your User Code to disarm and silence the alarm

Alarm_01_Garage_Door.png Alarm_02_Enter_Code.png

 2. Alarm memory appears as a red number circle around Status, To clear press STATUS then press the ALARMS tab 

Alarm_Memory_01_Disarmed.png Alarm_Memory_02_Status.png

3. Press ACKNOWLEDGE to select all alarms

Alarm_Memory_03_Alarms.png Alarm_Memory_04_Alarms_Ack.png

4. Press YES at the confirmation popup to delete then press BACK ARROW to exit

Alarm_Memory_05_Confirm.png Alarm_Memory_06_Alarms_Cleared.png

 

 

 

 

 

 

Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.