2GIG GC2 - Learning The Basics Pt. 2

Bypassing Sensors

Bypassing turns off one or more sensors while still allowing arming the rest of the system

1. Press SECURITY then MENU

2. Press TOOLBOX then enter your Master Code

3. Press BYPASSED SENSORS then press to select sensor to bypass

4. Press BACK twice or the HOME button to exit

5. Arm by pressing SECURITY then ARM

6. Press STAY or AWAY to arm

Force Bypassing Sensors

Force bypassing bypasses any open sensors during arming

1. Press SECURITY then ARM

2. GoControl beeps and displays any open sensors, press BYPASS ALL then enter your User Code

3. Press STAY or AWAY to arm

 View Event History

The GoControl can save up to 100 events including arming, bypassing etc

1. Press SECURITY then MENU

2. Press TOOLBOX then enter your Master Code

3. Press SYSTEM HISTORY then scroll events then press BACK then the HOME button to exit

Volume & Brightness Settings

1. Press SECURITY then MENU

2. Press TOOLBOX then enter your Master Code

3. Press BRIGHTNESS / VOLUME then press to adjust settings then press OK to save and HOME button to exit

Voice & Door Chime Settings

1. Press SECURITY then press MENU

2. Check CHIME and or VOICE to enable or uncheck to disable then press HOME button to exit 

Viewing Severe Weather Alerts

When a Severe Weather Alert is issued the message center will have an emergency alert message with the nature and expiration time of the weather as specified by the National Weather Service

To end the alert, you can acknowledge and delete the message

1. Press TRASH icon then DELETE MESSAGE

2. Press OK then BACK or press the HOME button to exit